CLASSIK COOLING TOWERS, start at 2000, an ISO 9001-2008 Certified, dynamic company,
Welcome to Cross Flow cooling Towers The fill media is of chemically treated imported pinewood. The treated wooden splash box are supported on Stainless Steel Grips to ensure positive and permanent positioning.
The design incorporates accommodation of water with very high TDS factors All other parts of made out of hot dip galvanized steel, to ensure maximum durability.

The tower deisgn incorporates a FRP distribution basin with no. of flower type target nozzles in it and are located at the tower top. The water, by gravity, is dispersed over the fill media uniformly and water is allowed to pass vertically down along the honey comb fills.

The fan coupled directly to the motor is placed horizantally to draw air across the fill media.The fan coupled directly to the motor is placed horizantally to draw air across the fill media.

A small portion of water is evaporated which removes the heat from the remaining water. In warm moist air is drawn to the horizontally placed fan / motor and is discharged through the fan deck, to the atmosphere.

The resultant cold water is collected at the cooling tower collection sump from where it is re-circulated to the application.

  • Compact in design, saves space and energy
  • Easy maintenance by design
  • Do not require any elaborate pillar foundations, can be placed on any flat surface
  • All structural in HDG Steel
  • PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm
  • TEFC, IP-55 Protected 'F' Class Insulated motor with extended shaft
  • Adjustable pitch axial flow, dynamically balanced aluminium fans
  • Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  • All joints fastened with SS fasteners
  • Uniformity in water dispersion through flower pot target nozzles
  • Capacities 10TR to 600TR , in single cell
  • Water flow 5 CMH to 500 CMH, in single cell
  • Delta T (Temperature drop) 4Deg C to 30Deg C, in single cell
  • ABS Fills for high temperature applications (150Deg C)
  • Compact in design, saves space and energy
  • Easy maintenance by design
  • Do not require any elaborate pillar foundations, can be placed on any flat surface
  • All structural in HDG Steel
  • PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm
  • TEFC, IP-55 Protected 'F' Class Insulated motor with extended shaft
  • Adjustable pitch axial flow, dynamically balanced aluminium fans
  • Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  • All joints fastened with SS fasteners
  • Uniformity in water dispersion through flower pot target nozzles
  • Capacities 10TR to 600TR , in single cell
  • Water flow 5 CMH to 500 CMH, in single cell
  • Delta T (Temperature drop) 4Deg C to 30Deg C, in single cell
  • ABS Fills for high temperature applications (150Deg C)
  • Aluminium die casting m/c
  • Air compressors
  • A/C plant & cold rooms
  • Blow moulding M/c
  • Chemical industries
  • Dairy,Citrus and other food processing industries
  • Distilleries and Breweries plants
  • Diesel / Gas Gensets & Megawatt Projects
  • Glass Mfg. Plant
  • Herbal,Aromatics & extraction plants
  • Industries heat process
  • Oil refineries
  • Plastic injustion moulding m/c
  • PVC pipes mfg.plant
  • Soap / Cosmetic mfg. industries
  • Steel factory and foundry

our products

The tower design incorporates hot water inlet at the bottom collection sump circulated vertically to the mechanical rotary sprinkler located above the fill media. The inlet water pressure rotate the sprinkler, having extended arm pipes with orifices to disperse water uniformly over the fill media.

cross flow
Cooling Towers

ICT-square shaped towers

cross flow
Cooling Towers

ICT-square shaped towers

cross flow
Cooling Towers

ICT-square shaped towers

cross flow
Cooling Towers

ICT-square shaped towers